ELITE V2 Enable DFU Mode

Purpose:

In order to update firmware on the ELITE V2 ESD Test System you must enable DFU mode for the USB Connection.

Equipment:

• ELITE V2 and power cord

Procedure:

• Disconnect the power cable from the ELITE.
• Press and hold the “0” (zero) key on the ELITE keypad.
• While holding the “0” key, reengage the power plug to the ELITE.
• Follow the onscreen instructions.
• This will be a series of key holds switching between the “0” and “#” keys.
• When successful the ELITE will display DFU Mode.

You are now ready to connect the USB cable to your PC and begin the firmware updating process.