ELITE V2 Calibration
Purpose: Performing calibration/verification of the ELITE Tester V2 ESD Test System using the Botron Decabox. ELITE V2 calibration ...
How To Articles
Subscribe to recieve product announcements, feature updates, user stories, and technical posts.
ELITE V2 Decoding RFID Badges
The ELITE RFID badge decoding interface works with Wiegand type card readers, such as those from HID®. If you are unsure what reader inte...
ELITE V2 Enable DFU Mode
Purpose: In order to update firmware on the ELITE V2 ESD Test System you must enable DFU mode for the USB Connection. Equipment: ...
ELITE V2 Calibration - Discrete Resistors
Purpose: Performing calibration/verification of the ELITE V2 ESD Test System using a Resistor Decade Box and/or discrete resistors. ...
ELITE V2 Turn DHCP On or Off
Purpose Sometimes you need to work on your ELITE at your desk, or move your ELITE to a new location. When doing so, if you have disabl...
How to Factory Reset the ELITE V2
At a GlanceThe ELITE provides two methods for a factory reset. This is done via keypad or through the ELITE WebUI. In this document we wi...
How To Adjust Relative Humidity on The ELITE V2
Purpose Upon receipt of your ELITE V2 Test System, you may find the relative humidity display does not match the RH of your environmen...
Elite DataSystems Enterprise License Key Installation
This document will cover installing your Enterprise License Key for ELITE DataSystems (EDS). Installing an EDS 3X Enterprise License K...
Troubleshooting Issues at the Footplate
Purpose This document is intended to help you and our support agents more quickly pinpoint the root cause of issues that may happen as...
ELITE On-Demand ESD Test System Calibration
Purpose: Performing calibration/verification of the ELITE On-Demand ESD Test System using the Botron DECABOX. Equipment B88500 ...